AEO-CX-S Series Wireless Bridge Quick Configuration Guide
Original PDF: Simplified Chinese
An English PDF is available below. The original Simplified Chinese file is also provided for reference.
Document summary
Quick configuration reference for AEO-CX-S series CPEs, including installation, topology, button/DIP-switch and web configuration. Compare the actual unit with the relevant setup section.
What this document is for
Locate the installation, connection and configuration sections of the AEO-CX-S document, and confirm the method appropriate to the actual device.
Applicability
For the AEO-CX-S CPE and interface layouts illustrated in the original file. Confirm the exact model, hardware version, defaults and button-hold times against the actual unit and its documentation.
Document contents
- Installation and topology connections
- Quick bridge configuration, H/C DIP switch and RST button
- Examples of changing the IP address and channel with buttons
- Web configuration of network, login and related settings
Check before use
- Confirm that the unit has the illustrated H/C switch, RST button and numeric display before selecting the corresponding procedure.
- Example IP addresses, channels and reset times are not universal across the range.
- Check management accounts and security settings during initial configuration or handover.
File and applicability information
- Series
- Wireless bridges
- Models identified by the document
- AEO-CX-S series
- Original file language
- Simplified Chinese
Version or hardware fields not listed here have not been verified. They do not imply compatibility with every version.
Related troubleshooting
Summarized from the cover, contents and body of the corresponding PDF published on the Chinese website. This page is a reading guide; use the original file and exact model documentation for specifications, wiring and procedures.