AEO-5S9416-POE — English specifications
English · PDF · Revision EN-20261101-V178
Check the model, revision and document language before use.
AEO-5S9416-POE
16-port Gigabit surveillance PoE switch
- Network ports
- 16 x 10/100/1000Base-T(X) auto-negotiating PoE Ethernet ports
- Optical ports
- 4 x 1000M optical/copper Combo ports
- Power input
- AC100～240V ；50/60Hz
- PoE
- IEEE802.3af/at
- Operating temperature
- -10 °C ~ 55 °C
Check the exact model, document language and version before installation.
Product overview
16-port Gigabit surveillance PoE switch. Ethernet ports: 16 x 10/100/1000Base-T(X) auto-negotiating PoE Ethernet ports Optical ports: 4 x 1000M optical/copper Combo ports Operating voltage: AC100～240V ；50/60Hz
Plan device connections, uplinks and power together
Commercial Gigabit PoE switches combine device data connections and power over network cabling. Select a model for the device count, traffic load and uplink method. Check the actual speeds of access and uplink ports in their respective specifications. For commercial installations, check ambient temperature, power and cooling against the conditions in the equipment room, building or surveillance equipment area.
Select ports for the connection count
List the device count and interface types. Check the available ports and allow for additional devices later.
Select uplinks for the traffic load
Check access ports, uplink ports and switching capacity against each device's traffic and simultaneous operation.
Plan device power together
Check the PoE types supported by the switch and devices, the per-port capacity and total power budget. Use the power supply configuration to confirm which devices can be powered simultaneously.
Typical applications
Surveillance site connections
Plan the switch and uplink connections for the camera count, video bitrates and power conditions.
Building network connections
Connect network devices within a floor or area and choose connection points around the existing cabling.
Commercial networks
Plan connections around the devices in offices, buildings and surveillance equipment areas, and define the power, cooling and cabling conditions.
Specifications
| Interfaces and transmission | |
|---|---|
| Backplane bandwidth |
|
| MAC address table |
|
| Switching mode |
|
| Network ports |
|
| Ethernet port characteristics |
|
| Optical ports |
|
| Packet forwarding rate |
|
| Power | |
| Power input |
|
| Power consumption |
|
| PoE |
|
| PoE pin assignment |
|
| PoE output per port |
|
| Total output power |
|
| Construction and environment | |
| Enclosure material |
|
| Dimensions (L*W*H) |
|
| Operating temperature |
|
| Operating humidity |
|
| Protection rating |
|
Downloads
Check the model and revision before use. Original-language files are identified below.
Download PDF
Selection support
Ports and uplinks
Count access ports and uplinks; check their interfaces and speeds.
PoE requirements
Confirm the powered devices' PoE standards and per-port and total power needs.
Installation
Check the power source, management requirements and installation environment.