AEO-8S7108

Industrial 8-port Gigabit Ethernet switch

Check the exact model, document language and version before installation.

Product overview

AEO-8S7108 has the following interface and installation configuration:

AEO-8S7108 — Specifications
Interfaces and transmission
Backplane bandwidth	28Gbps
Packet buffer	2Mbits
MAC address table	2K
Maximum frame size (bytes)	9216bytes
Ethernet uplink ports	1 x 10/100/1000Base-T(X) auto-negotiating Ethernet port
Network ports	8 x 10/100/1000Base-T(X) auto-negotiating Ethernet ports
Ethernet port characteristics	Half duplex, full duplex and auto-negotiation
Power
Power input	12–57 VDC
Power consumption	≤5W
Power connector type	3 pin terminal block and Φ2.1mm DC connector
Reverse polarity protection	Supported
Power overload protection	Supported
Power redundancy	Supported
Management and control
IPC extension	Supported; up to 250m
One-touch VLAN	Supported
CBIT video optimization	Supported
Protection and reliability
EN61000-4-2 electrostatic discharge	±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity	10V/m(80～1000MHz)
EN61000-4-4 electrical fast transients	±10KV power line; ±2KV data line
EN61000-4-5 surge immunity	±10KV/CM, ±10KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity	3V(10KHz～150KHz)，10V(150KHz～80KHz)
Construction and environment
Enclosure material	Aluminum alloy; fanless
Dimensions (LWH)	135 × 110 × 50mm
Mounting	35mm DIN rail
Operating temperature	-40 °C ~ 85 °C
Operating humidity	5% ~ 95% (non-condensing)
Protection rating	IP40

Check the model and revision before use. Original-language files are identified below.

English · PDF · Revision EN-20261101-V178

Check the model, revision and document language before use.

Selection support

Count access ports and uplinks; check their interfaces and speeds.

Confirm the powered devices' PoE standards and per-port and total power needs.

Check the power source, management requirements and installation environment.