AEO-7100S-F
Compact Ethernet-over-coax converter
- Network ports
- 1 x 10/100Base-T(X) auto-negotiating Ethernet port
- Data rate
- 95 Mbps
- Power input
- 12-18 V DC
- Operating temperature
- -20 to +70 °C
Check the exact model, document language and version before installation.
Product overview
Ethernet-over-coax converter with one 10/100Base-T(X) Ethernet port and one BNC coaxial port. Used in pairs, with a 12-18 V DC power input.
The AEO-7100S-F connects Ethernet equipment over existing coaxial cabling. It can be used to upgrade analog CCTV cabling for IP surveillance and to connect network cameras in elevator installations.
Each unit provides one 10/100Base-T(X) Ethernet port and one 75-ohm BNC coaxial port. Matching units are used in pairs. The plug-and-play design requires no software configuration. Each end uses a separate 12-18 V DC power supply.
Features
- One auto-negotiating 10/100Base-T(X) Ethernet port.
- One 75-ohm BNC coaxial port.
- Used in pairs for Ethernet transmission over coaxial cabling.
- Plug-and-play operation without software configuration.
- Compact aluminum-alloy housing, 85 x 77 x 25 mm.
Specifications
| Interfaces and transmission | |
|---|---|
| Network ports |
|
| Ethernet standards |
|
| Ethernet operating modes |
|
| Data rate |
|
| Coaxial port |
|
| Coaxial impedance |
|
| Power | |
| Power connector |
|
| Power input |
|
| Power consumption |
|
| Construction and environment | |
| Operating temperature |
|
| Operating humidity |
|
| Housing |
|
| Ingress protection |
|
| Dimensions (L x W x H) |
|
Selection support
Existing cable
Identify cable type, condition, joints and route length.
Connected equipment
Check endpoint interfaces, device count and required bandwidth.
Power and compatibility
Confirm matching transmitters, receivers and their power requirements.