KLK-220-8

Surge-protected rack PDU

Check the exact model, document language and version before installation.

Product overview

KLK-220-8 has the following interface and installation configuration:

English label guide

Rack PDU label

Product: Rack power distribution unit (PDU).
Ratings: Use the voltage, current and maximum load stated on the unit or its matching specification sheet.

Check the nameplate on the installed unit for its electrical ratings.

KLK-220-8 — Specifications
Power
PDU rated current	10A
Power cord specification	3 × 1.5 mm × 2 m
Protection and reliability
Protection modes	Common mode (L、N/PE); differential mode (L/N)
Nominal voltage Un	220V/50HZ
Nominal discharge current (8/20us) In	5KA
Maximum discharge current (8/20us) Imax	10KA
Voltage protection level Up	<1.5KV at 5KA (8/20us)
Leakage current I1	<50μA
Response time tA	<25ns
Rated voltage Uc	385 V
Construction and environment
PDU flame-retardant rating	UL94V-0
PDU enclosure material	Flame-retardant ABS
Individual outlet material	Flame-retardant PC
Outlet contact material	Phosphor bronze
Dimensions (LWH)	485 × 45 × 45mm
Operating temperature	-40 °C～85 °C
Operating humidity	5% ~ 95% (non-condensing)
Other specifications
Number of protected outlets	8

Check the model and revision before use. Original-language files are identified below.

English · PDF · Revision EN-20261102-V179

Check the model, revision and document language before use.

Selection support

Identify the equipment and interfaces to be connected.

List the required bandwidth, distance and device count.

Confirm the supply, mounting space and environmental conditions.