SM-GE-1310/1550nm-SC

Gigabit single-mode single-fiber SFP transceiver

Request a quote English specifications (PDF)

Operating temperature: 0~ 70 °C

Check the exact model, document language and version before installation.

Product overview

SFP optical transceivers connect compatible equipment to fiber links. Host interfaces, data rates and paired transmit and receive wavelengths determine the required module.

SM-GE-1310/1550nm-SC SM-GE1310/1550nm-SC — SM-GE1310/1550nm-SC

Specifications

SM-GE-1310/1550nm-SC — Specifications
Interfaces and transmission
Connector configuration	AC coupling
TX center wavelength 1310 λ	1260~1360nm
RX center wavelength 1550 λ	1520~1570nm
Alarm signal	TTL
Differential input amplitude VinPP	200~1200mV
Transmitter disable input, high level	2~3.3V
Transmitter disable input, low level	0.8V
Transmitter disable time	0.14ms (maximum 5ms)
Extinction ratio Ext	8.2dB
Spectral width (-20dB) △λ	4nm (FP-LD,RMS) 1nm (DFB-LD,-20dB)
Single-ended output amplitude VoutPP	200~800mV
Loss-of-signal output (TTL, active high)	2V
Receiver sensitivity Sen	-25dBm (BER<1E-10)
Receiver overload PinMAX	-3dBm
Average optical output power Po	-6dBm
Power
Supply voltage Vcc	3~3.6V
Construction and environment
Operating temperature	0~ 70 °C
Storage temperature Ts	-40~ 85 °C
Operating relative humidity	5% ~ 95% (non-condensing)
Other specifications
Differential input impedance (Rin)	100 Ω

Downloads

Check the model and revision before use. Original-language files are identified below.

SM-GE-1310/1550nm-SC — English specifications

English · PDF · Revision EN-20261104-V186

Check the model, revision and document language before use.

Download PDF

Selection support

Connection

Identify the equipment and interfaces to be connected.

Performance

List the required bandwidth, distance and device count.

Power and installation

Confirm the supply, mounting space and environmental conditions.

Ask about this model