DC24V/12W
PoE power adapter for wireless bridges
- Power input
- AC100~240V
Check the exact model, document language and version before installation.
Product overview
PoE power adapter series for wireless bridges
This series includes separate DC15V and DC24V supplies for compatible wireless bridge equipment. Verify the exact bridge model and input rating before selecting a supply for assembly, replacement or project spares. The black plug-in enclosure has ports marked LAN and POE to distinguish the data side from the powered side. Plan its position and cabling against the equipment installation requirements and record the output voltage with the bridge model. Check input voltage, required current, power pin assignment, polarity and network interface. These supplies use non-standard PoE; different voltage versions must not be interchanged based on appearance.
Separate 15V / 24V supply versions
DC15V and DC24V are different versions. Verify the exact bridge model and power requirements before use.
Match each supply to the approved equipment
Confirm the exact compatible bridge model and voltage for each supply.
LAN / POE port markings
The enclosure has separate LAN and POE markings. Use the equipment connection requirements to identify the data and powered sides.
Independent plug-in supply
Place the black plug-in supply and route its cables according to the compatible bridge's installation requirements.
Specifications
| Interfaces and transmission | |
|---|---|
| Signal connector |
|
| Power | |
| Power input |
|
| Input current |
|
| Output voltage |
|
| Rated output current |
|
| Power output connector |
|
| Power output pin assignment |
|
| Input frequency |
|
Selection support
Connection
Identify the equipment and interfaces to be connected.
Performance
List the required bandwidth, distance and device count.
Power and installation
Confirm the supply, mounting space and environmental conditions.