AEO-8802D

Industrial 2-port Fast Ethernet Ethernet Switch

Request a quote English specifications (PDF)

Network ports: 2 x 10/100Base-T(X) auto-negotiating Ethernet ports
Optical ports: 2 x 100Base-X single-mode, single-fiber optical ports; FC by default
Power input: 12–57 VDC
Operating temperature: -40 °C ~ 85 °C
Mounting: 35mm DIN rail

Check the exact model, document language and version before installation.

Product overview

AEO-8802D has the following interface and installation configuration:

Network ports: 2 x 10/100Base-T(X) auto-negotiating Ethernet ports
Optical ports: 2 x 100Base-X single-mode, single-fiber optical ports; FC by default
Power input: 12–57 VDC

Specifications

AEO-8802D — Specifications
Interfaces and transmission
Backplane bandwidth	1.6Gbps
Packet buffer	1Mbits
MAC address table	2K
Maximum frame size (bytes)	1536bytes
Switching mode	Store and Forward
Network ports	2 x 10/100Base-T(X) auto-negotiating Ethernet ports
Optical ports	2 x 100Base-X single-mode, single-fiber optical ports; FC by default
Optical wavelength	1310nm/1550nm (single-mode, single-fiber)
Optical transmission distance	20km standard (single-mode, single-fiber); customizable up to 100km
Optical transmit power	-8~-2dBm
Optical receiver sensitivity	≤-35dBm
Power
Power input	12–57 VDC
Power consumption	≤4W
Power connector type	6pin terminal block; one alarm output
Reverse polarity protection	Supported
Power overload protection	Supported
Power redundancy	Supported
Management and control
IPC extension	Supported; up to 250m
One-touch VLAN	Supported
CBIT video optimization	Supported
Protection and reliability
EN61000-4-2 electrostatic discharge	±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity	10V/m(80～1000MHz)
EN61000-4-4 electrical fast transients	±10KV power line; ±2KV data line
EN61000-4-5 surge immunity	±2KV/CM, ±2KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity	3V(10KHz～150KHz)，10V(150KHz～80KHz)
Construction and environment
Enclosure material	Aluminum alloy; fanless
Dimensions (LWH)	150 × 120 × 50mm
Mounting	35mm DIN rail
Operating temperature	-40 °C ~ 85 °C
Operating humidity	5% ~ 95% (non-condensing)
Protection rating	IP40

Downloads

Check the model and revision before use. Original-language files are identified below.

AEO-8802D — English specifications

English · PDF · Revision EN-20261101-V178

Check the model, revision and document language before use.

Download PDF

Industrial DIN-Rail Fiber Units — Installation Notes

English · PDF · Revision EN-20261101-V178

For the legacy industrial fiber units with UP/DN optical ports and a manual Loop SW described in the Chinese installation manual. This procedure does not apply to managed Ethernet ring protocols or to models without these controls.

Download PDF

PDF

Industrial DIN-Rail Fiber Daisy-Chain Transmission Unit Installation Guide

Listed 2021-04-06 Language: Simplified Chinese · Version: check the original file

Read guide → Download original file

Selection support

Connection

Identify the equipment and interfaces to be connected.

Performance

List the required bandwidth, distance and device count.

Power and installation

Confirm the supply, mounting space and environmental conditions.

Ask about this model