Skip to content
Request a quoteCN
Menu
AEO-8804D/POE Industrial 4-port Fast Ethernet PoE Ethernet Switch

AEO-8804D/POE

Industrial 4-port Fast Ethernet PoE Ethernet Switch

Request a quote English specifications (PDF)
Network ports
4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports
2 x 100Base-X single-mode, single-fiber optical ports; FC by default
Power input
44–57 VDC
PoE
IEEE802.3af/at
Operating temperature
-40 °C ~ 85 °C
Mounting
35mm DIN rail

Check the exact model, document language and version before installation.

Product overview

AEO-8804D/POE has the following interface and installation configuration:

  • Network ports: 4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
  • Optical ports: 2 x 100Base-X single-mode, single-fiber optical ports; FC by default
  • Power input: 44–57 VDC
AEO-8804D/POE Front view
Front view
AEO-8804D/POE Rear view
Rear view

Specifications

AEO-8804D/POE — Specifications
Interfaces and transmission
Backplane bandwidth
  • 1.6Gbps
Packet buffer
  • 1Mbits
MAC address table
  • 2K
Maximum frame size (bytes)
  • 1536bytes
Switching mode
  • Store and Forward
Network ports
  • 4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports
  • 2 x 100Base-X single-mode, single-fiber optical ports; FC by default
Optical wavelength
  • 1310nm/1550nm (single-mode, single-fiber)
Optical transmission distance
  • 20km standard (single-mode, single-fiber); customizable up to 100km
Optical transmit power
  • -8~-2dBm
Optical receiver sensitivity
  • ≤-35dBm
Power
Power input
  • 44–57 VDC
Power consumption
  • ≤4W (excluding PoE)
Power connector type
  • 6pin terminal block; one alarm output
Reverse polarity protection
  • Supported
Power overload protection
  • Supported
Power redundancy
  • Supported
PoE
  • IEEE802.3af/at
PoE pin assignment
  • V+ V+ V- V- on pins 1, 2, 3, 6 (pins 4, 5, 7, 8 available on request)
PoE output per port
  • IEEE802.3af：15.5W；IEEE802.3at：25.5W
Management and control
IPC extension
  • Supported; up to 250m
One-touch VLAN
  • Supported
CBIT video optimization
  • Supported
Protection and reliability
EN61000-4-2 electrostatic discharge
  • ±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity
  • 10V/m(80～1000MHz)
EN61000-4-4 electrical fast transients
  • ±10KV power line; ±2KV data line
EN61000-4-5 surge immunity
  • ±2KV/CM, ±2KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity
  • 3V(10KHz～150KHz)，10V(150KHz～80KHz)
Construction and environment
Enclosure material
  • Aluminum alloy; fanless
Dimensions (L*W*H)
  • 150 × 120 × 50mm
Mounting
  • 35mm DIN rail
Operating temperature
  • -40 °C ~ 85 °C
Operating humidity
  • 5% ~ 95% (non-condensing)
Protection rating
  • IP40

Downloads

Check the model and revision before use. Original-language files are identified below.

AEO-8804D/POE — English specifications

English · PDF · Revision EN-20261101-V178

Check the model, revision and document language before use.

Download PDF

Industrial DIN-Rail Fiber Units — Installation Notes

English · PDF · Revision EN-20261101-V178

For the legacy industrial fiber units with UP/DN optical ports and a manual Loop SW described in the Chinese installation manual. This procedure does not apply to managed Ethernet ring protocols or to models without these controls.

Download PDF
PDF

Industrial DIN-Rail Fiber Daisy-Chain Transmission Unit Installation Guide

Listed Language: Simplified Chinese · Version: check the original file

Read guide → Download original file
Selection support

Connection

Identify the equipment and interfaces to be connected.

Performance

List the required bandwidth, distance and device count.

Power and installation

Confirm the supply, mounting space and environmental conditions.

Ask about this model