AEO-8818M-S

Industrial Managed 8-port Gigabit Ethernet Switch

Check the exact model, document language and version before installation.

Product overview

AEO-8818M-S has the following interface and installation configuration:

AEO-8818M-S — Specifications
Interfaces and transmission
Backplane bandwidth	20Gbps
Packet buffer	2Mbits
MAC address table	16K
Maximum frame size (bytes)	10Kbytes
Network ports	8 x 10/100/1000Base-T(X) auto-negotiating Ethernet ports
Optical ports	2 x 1000Base-X SFP optical ports
Switching mode	Store and Forward
Power
Power input	12–57 VDC
Power consumption	≤5W
Power connector type	6pin terminal block; one alarm output
Reverse polarity protection	Supported
Power overload protection	Supported
Power redundancy	Supported
Management and control
Management features	802.1Q VLAN, RERP ring protocol, port rate limiting and SNMP; web-based management and port binding.
Protection and reliability
EN61000-4-2 electrostatic discharge	±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity	10V/m(80～1000MHz)
EN61000-4-4 electrical fast transients	±10KV power line; ±2KV data line
EN61000-4-5 surge immunity	±2KV/CM, ±2KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity	3V(10KHz～150KHz)，10V(150KHz～80KHz)
Mean time between failures (MTBF)	100000 h
Construction and environment
Protection rating	IP40
Enclosure material	Aluminum alloy; fanless
Dimensions (L x W x H)	150 × 120 × 50mm
Mounting	35mm DIN rail
Operating temperature	-40 °C ~ 85 °C
Operating humidity	5% ~ 95% (non-condensing)

Check the model and revision before use. Original-language files are identified below.

English · PDF · Revision EN-20261102-V179

Check the model, revision and document language before use.

Selection support

Identify the equipment and interfaces to be connected.

List the required bandwidth, distance and device count.

Confirm the supply, mounting space and environmental conditions.