Skip to content
Menu
AEO-8818M-S/POE Industrial Managed 8-port Gigabit PoE Ethernet Switch

AEO-8818M-S/POE

Industrial Managed 8-port Gigabit PoE Ethernet Switch

Network ports
8 x 10/100/1000Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports
2 x 1000Base-X SFP optical ports
PoE
IEEE802.3af/at
Operating temperature
-40 °C ~ 85 °C
Mounting
35mm DIN rail

Check the exact model, document language and version before installation.

Product overview

AEO-8818M-S/POE has the following interface and installation configuration:

  • Network ports: 8 x 10/100/1000Base-T(X) auto-negotiating PoE Ethernet ports
  • Optical ports: 2 x 1000Base-X SFP optical ports
  • Mounting: 35mm DIN rail

Specifications

AEO-8818M-S/POE — Specifications
Interfaces and transmission
Backplane bandwidth
  • 20Gbps
Packet buffer
  • 2Mbits
MAC address table
  • 16K
Maximum frame size (bytes)
  • 10Kbytes
Network ports
  • 8 x 10/100/1000Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports
  • 2 x 1000Base-X SFP optical ports
Switching mode
  • Store and Forward
Power
Operating power supply
  • 44–57 VDC
Power consumption
  • ≤5W (excluding PoE)
Power connector type
  • 6pin terminal block; one alarm output
Reverse polarity protection
  • Supported
Power overload protection
  • Supported
Power redundancy
  • Supported
PoE
  • IEEE802.3af/at
PoE pin assignment
  • V+ V+ V- V- on pins 1, 2, 3, 6 (pins 4, 5, 7, 8 available on request)
PoE output per port
  • IEEE802.3af:15.5W;IEEE802.3at:25.5W
Management and control
Management features
  • 802.1Q VLAN, RERP ring protocol, port rate limiting and SNMP; web-based management and port binding.
Protection and reliability
EN61000-4-2 electrostatic discharge
  • ±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity
  • 10V/m(80~1000MHz)
EN61000-4-4 electrical fast transients
  • ±10KV power line; ±2KV data line
EN61000-4-5 surge immunity
  • ±2KV/CM, ±2KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity
  • 3V(10KHz~150KHz),10V(150KHz~80KHz)
Mean time between failures (MTBF)
  • 100000 h
Construction and environment
Protection rating
  • IP40
Enclosure material
  • Aluminum alloy; fanless
Mounting
  • 35mm DIN rail
Dimensions (L*W*H)
  • 150 × 120 × 50mm
Operating temperature
  • -40 °C ~ 85 °C
Operating humidity
  • 5% ~ 95% (non-condensing)
Selection support

Connection

Identify the equipment and interfaces to be connected.

Performance

List the required bandwidth, distance and device count.

Power and installation

Confirm the supply, mounting space and environmental conditions.

Ask about this model