AEO-8S1104/POE

Industrial 4-channel Fast Ethernet PoE optical transmission unit

Request a quote

Network ports: 4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports: 1 x 100Base-X optical port; FC by default; FC/SC/ST optional
Power input: 44–57 VDC
PoE: IEEE802.3af/at
Operating temperature: -40 °C ~ 85 °C
Mounting: 35mm DIN rail

Check the exact model, document language and version before installation.

Product overview

AEO-8S1104/POE has the following interface and installation configuration:

Network ports: 4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports: 1 x 100Base-X optical port; FC by default; FC/SC/ST optional
Power input: 44–57 VDC

AEO-8S1104/POE Front ports — Front ports

AEO-8S1104/POE Rear DIN-rail mounting — Rear DIN-rail mounting

Specifications

AEO-8S1104/POE — Specifications
Interfaces and transmission
Backplane bandwidth	1Gbps
Packet buffer	448Kbits
MAC address table	1K
Maximum frame size (bytes)	1536bytes
Network ports	4 x 10/100Base-T(X) auto-negotiating PoE Ethernet ports
Optical ports	1 x 100Base-X optical port; FC by default; FC/SC/ST optional
Optical wavelength	1310nm/1550nm (single-mode, single-fiber); 1310nm (single-mode, dual-fiber); 850nm (multimode, dual-fiber)
Optical transmission distance	20 km standard (single-mode, single-fiber); ≤550m (multimode, dual-fiber)
Power
Power input	44–57 VDC
Power consumption	≤4W (excluding PoE)
Power connector type	3 pin terminal block and Φ2.1mm DC connector
Reverse polarity protection	Supported
Power overload protection	Supported
Power redundancy	Supported
PoE	IEEE802.3af/at
PoE pin assignment	V+ V+ V- V- on pins 1, 2, 3, 6 (pins 4, 5, 7, 8 available on request)
PoE output per port	IEEE802.3af：15.5W；IEEE802.3at：25.5W
Management and control
IPC extension	Supported; up to 250m
One-touch VLAN	Supported
CBIT video optimization	Supported
Protection and reliability
EN61000-4-2 electrostatic discharge	±8KV contact discharge; ±15KV air discharge
EN61000-4-3 radiated immunity	10V/m(80～1000MHz)
EN61000-4-4 electrical fast transients	±10KV power line; ±2KV data line
EN61000-4-5 surge immunity	±10KV/CM, ±10KV/DM power line; ±2KV data line
EN61000-4-6 conducted immunity	3V(10KHz～150KHz)，10V(150KHz～80KHz)
Construction and environment
Enclosure material	Aluminum alloy; fanless
Dimensions (L x W x H)	135 × 110 × 40mm
Mounting	35mm DIN rail
Operating temperature	-40 °C ~ 85 °C
Operating humidity	5% ~ 95% (non-condensing)
Protection rating	IP40

Selection support

Connection

Identify the equipment and interfaces to be connected.

Performance

List the required bandwidth, distance and device count.

Power and installation

Confirm the supply, mounting space and environmental conditions.

Ask about this model